RepRap Champion 3D Printer MK2B PCB Heated Bed 200x200mm, Borosilicate Glass, Hardware, Wiring, Thermistor Kit for Prusa i3 or other RepRap

Speed up your reprap heated bed assembly – get all necessary parts in one kit. You will need 2-4 paper binder clips to hold glass in place, best source for these clips – ebay.com or your local office supply store.

MK2B Heated Bed Specs:

Dimensions: 214mm x 214mm
Hole Spacing: 209mm
Laminate FR4 1.6mm
2 Layer, 35µm Copper
Red Soldermask – Both Side
White Silkscreen – Both Side
Power Input: 12V/24V DC
Copper Plated Holes

Borosilicate Glass Specs:

Dimensions: 213mm x 200mm
Thickness: 3mm

NTC 3950 Thermistor Specs:

Thermistor temperature value table for Marlin
Small Size: 1.25mmx2.0mm glass bead
High accuracy: 1%
Resistance value at 25°C=100K
Wiring insulation: high temperature teflon/PTFE
Wiring length: 1 meter.

Package contents:

1 x MK2B PCB Heated Bed
1 x Borosilicate Glass Print Surface 200x213mm
1 x NTC 3950 Wired Thermistor (wiring is 1 meter long)
1 x Power wiring (2 wires, 1 meter long each)
4 x M3x05 x 25 Stainless socket head screws
4 x M3x05 Steel Locknuts
8 x M3x9 Steel Washers
1 x Silicone Rubber Spacer, about 50mm long.

Product Features

  • Compatible with most RepRap 3d printers
  • Popular, dual 12V / 24V power MK2B design
  • All necessary for MK2B mounting small bits are included
  • Wiring and pre-thermistor are included
  • Use binder clips to hold glass plate on the MK2B

Detailed Information available on our Homepage…

Published by

admin

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

One thought on “RepRap Champion 3D Printer MK2B PCB Heated Bed 200x200mm, Borosilicate Glass, Hardware, Wiring, Thermistor Kit for Prusa i3 or other RepRap”

Leave a Reply

Your email address will not be published. Required fields are marked *