NinjaTek CHEETAH Flexible Filament TPU 1.75MM 50g Midnight (Black)

Each Splash Spool is loaded with approximately 50 grams of NinjaTek’s CHEETAH 1.75MM TPU flexible filament (~57 feet/17.37 meters). CHEETAH is made in the USA. CheetahTM flexible filament is the fastest and easiest to print flexible filament on the market. The focus in development of this material was on optimizing the user experience. The result is a filament that is printable across all types of desktop 3D printers at ABS and PLA speeds, many times twice the speed of other flexible materials on the market.

Product Features

  • Approximately 50 grams ,~57 feet/17.37 meters of flexible filament on a spool with a case so it’s not flopping all over the place. Splash Spools store easily in a desk drawer, stacked space or even hang on a wall. Please be sure you are ordering the correct diameter for your printer (1.75MM or 1.75MM).
  • Shore Hardness = 95A, Prints at speeds greater than 60 mm/s with standard ABS settings,Significantly greater impact strength than all widely used materials – 84% greater than ABS!
  • Industry leading toughness and durability to ensure longevity in printed parts, Abrasion resistance 40% better than ABS and 76% better than PLA, 580% elongation capabilities improve ability to withstand wear and tear
  • Patented low friction exterior allows for smooth feeding, Chemical resistance to many materials, including: naphtha, ASTM Oils #1-3, petroleum and freon, Consistent diameter and material properties providing reliable, high quality prints, REACH and RoHS 2002/95/EC Directive compliant
  • The focus in development of this material was on optimizing the user experience. The result is a filament that is printable across all types of desktop 3D printers at ABS and PLA speeds, many times twice the speed of other flexible materials on the market.

Check Out Our Website For Details…

Published by

admin

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

3 thoughts on “NinjaTek CHEETAH Flexible Filament TPU 1.75MM 50g Midnight (Black)”

  1. No more print failures due to soft filament! I have been printing with TPE/TPU for a while on my Mendelmax3 but I have always had feed issues if I ran them at the suggested run temps. I have had to run it much hotter than the suggested ranges to stop the material from shooting out the side of the extruder. Such a pain in the neck! I decided to try the Cheetah material as it looks stiffer than NinjaFlex. What a difference! It runs perfectly on my setup with no side run outs! The finish is beautiful and I couldn’t be happier. The only…

  2. This prints GREAT on my Monoprice Mini, with a bowden tube. I can directly compare this to SainSmart TPU (also 95A). This stuff comes out less glossy, and prints perfectly on the first try. The SainSmart took a lot of tuning, and I have to respool it before printing because it was kinked up on the spool.Cheetah, like the other NinjaTek filaments I’ve seen, is spooled nice and loose, the filament is very clean and straight, and it feeds freely without issue. This stuff sticks…

  3. I feel its a little overpriced, but it works great. I’ve made a few models for fun as well as a gasket and tiny shock absorber. They all work great. This filament is tough. If you get strings coming off your model, you have to snip them. If you try and pull or twist them off you might rip a seam between the layers. I bought the lava color.I’ll buy more of this brand in the future if I need it, but at $13/50g, I won’t be getting it for the fun of it. Even just 100g for the same price…

Leave a Reply

Your email address will not be published. Required fields are marked *