NinjaFlex TPU 3D Printing Filament – 3mm .75kg – GOLD

NinjaFlex flexible filament leads the industry thanks to its superior flexibility and longevity compared to non-polyurethane materials. Its consistency in diameter and ovality (roundness) outpaces other polyurethane materials.

Made from a specially formulated thermoplastic polyurethane (TPU) material, this patented technology boasts a low-tack, easy-to-feed texture. The result is uniquely flexible, strong prints ideal for direct-drive extruders.

Suggested Applications: Seals, gaskets, plugs, leveling feet, protective applications.
SDS &

KEY FEATURES:

  • Shore Hardness = 85A
  • Truly flexible (no fill or layer manipulation required to achieve performance)
  • 660% elongation allows for repeated movement and impact without wear or cracking 
  • Polyurethane composition allows for excellent vibration reduction
  • Patented low friction exterior allows for smooth feeding
  • Abrasion resistance 20% better than ABS and 68% better than PLA
  • Consistent diameter and material properties providing reliable, high quality prints
  • Chemical resistant to many materials, including naphtha, ASTM Oils #1-3, petroleum and freon
  • Adheres to all standard build platforms without glue or tape
  • REACH and RoHS 2002/95/EC Directive compliant

PRINTING GUIDELINES:

  • Extruder Temperature:  225°C – 235°C
  • Platform Temperature: Room temperature – 40°C
    Glue and/ or blue painters tape is suggested if not using a heated bed.
  • Print Speed: 
    Top and bottom layers: 10-20 mm/ sec (600-1200 mm/ min)
    Infill speeds: 15-35 mm/ sec (900-2100 mm/ min)
    Layer 2+ use cooling fan if available.

Product Features

  • Truly flexible – no fill or layer manipulation required to achieve performance
  • 660% elongation allows for repeated movement & impact without wear or cracking
  • Excellent vibration reduction
  • Shore Hardness = 85A
  • Suggested Applications: Seals, gaskets, plugs, leveling feet, protective applications.

Check Out Our Website For Details…

Published by

admin

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

2 thoughts on “NinjaFlex TPU 3D Printing Filament – 3mm .75kg – GOLD”

  1. hard to get it going but perseverance pays off Print very slowly. Less than 20mm/s. Use a bit more retraction than normal (1.5mm or so) to eliminate stringing. Non-print moves can remain fast. It cannot handle any kind of unexpected pressure in the nozzle so make sure you’ve completely cleared any ABS and that your printer is fully balanced. Excessive pressure leads to buckling.It prints with a bit of a sheen to it and has a very mild odor. Also, it’ll rip the kapton tape right off your plate so if you can print on a…

  2. Persistence Required. Here are my recommendations to get near perfect prints on the Ultimaker 2 and other Ultimaker printers.Never has a 3D Printer filament annoyed me more than this Ninjaflex has, after weeks and weeks of fine tuning and perfecting loading and print settings I was finally able to get it working.With the Ultimaker 2 I highly suggest you use the Olsson Block and get a large diameter nozzle, larger than 0.4mm. I’m not suggesting a large nozzle for easy flow and reduced feeder…

Leave a Reply

Your email address will not be published. Required fields are marked *