Mitus ABS Filament 1.75mm 1 kg for 3D Printing, Made in the USA, Cool Gray

Mitus brand ABS filament is superior quality ABS designed for ultra smooth and reliable printing in 3D printers. ABS is the gold standard in 3D printing, renowned for its high strength. Mitus brand filaments are produced using only 100% virgin materials resulting in superior quality filament. One common problem with cheaper China made filament is the rampant use of cheap plastic fillers such as calcium carbonate, which makes ABS very brittle and leads to extruder clogs. Mitus brand filament combines the highest grade raw materials with leading precision equipment. In fact, all Mitus brand filament is measured during extrusion with an industry leading four laser micrometers which controls the diameter and roundness, producing a tolerance of +/- 0.03mm. Another common problem with China made brands are the voids or cavities in the middle of the filament which cause uneven printing and even failures. Mitus brand filament is guaranteed to be void and cavity free.

All Mitus ABS filaments are produced with vibrant and rich colors, each being thoroughly tested and evenly distributed. Every Mitus color has a pantone color chip number for exact reproducibility. All Mitus ABS spools comes with a net weight of 1 kg ABS. Each Mitus ABS spool comes vacuum sealed with 99.98% of moisture removed and includes a desiccant pack for extra protection. The spool features a unique double zipper storage bag which allows for the reuse and storage of the ABS spool after opening. Mitus brand guarantees complete satisfaction with every filament spool.

  • Diameter: 1.75mm +/- 0.03mm
  • Net weight: 1kg
  • Proudly made in America

Special printing note – Depending on the 3D printer used, a slight increase in flow rate from 100 to 110-140 may be required. Additionally, some 3D printers will extrude more smoothly with a 5°C increase in temperature, from 240°C to 245°C for darker colors and 235°C to 240°C for lighter colors.

Product Features

  • 100% virgin material without cheap plastic fillers or regrind
  • ABS Print Extrusion Temperature: 230 – 245°C
  • Quad laser micrometer for controlling diameter and roundness tolerances, within +/- .03mm
  • Pantone color: PQ-COOLGRAY6C and hex color code: A7a8aa
  • Proudly made in the USA

Check Out Our Website For Details…

Published by


3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

3 thoughts on “Mitus ABS Filament 1.75mm 1 kg for 3D Printing, Made in the USA, Cool Gray”

  1. I ordered three Mitus ABS Filaments from the same vendor, and for each one of them, they did not want to feed through my printer without me pushing it through by hand. When I finally got it to feed through on its own, the prints I made were at .2 layer height using fine quality, and there were some lumps on the surface of all three that I used Mitus filament for. I am going to see if I can clean out my printer head to see if that was what the problem is, but in between trying to use the Mitus…

  2. I have used other Mitus ABS Filaments and I haven’t had much issue. So far this seems to be the case with this grey one as well.So far so good. Will update after using for a while.update: So far I printed a few items with the grey. I printed 1 out of 3 items without issue. It appears when this filament was wound on the spool it somehow crossed over it self because it got tangled twice mid-prints. I checked on the print several times and I found the issue to be the way the…

Leave a Reply