*With PTFE in hot regions of our HotEnd we can reach 260C with the supplied thermistor. By swapping a thermistor for a thermocouple (may require additional electronics) you can reach over 280C.
*This not only allows you to print extremely high temperature materials like PP/ Polycarbonate and Nylons but also eliminates HotEnd meltdown failures associated . latest hotend has a PTFE liner inside the hotend this liner is never subjected to high temperatures so there is no risk of damaging the liner through overheating.
*Our new HeaterBlock gives the fastest heat up times and the most responsive temperature control by clamping around the cartridge for maximum thermal contact. The new thermistor placement means you get the most accurate temperature readings with the fastest response. What this means for you the user is that you can go from 20C
to 200C in just 65 seconds, temperature control is responsive enough that you can keep the hotend within 0.5C of your set temperature or less with ease.
NTC 3950 Thermistor parameters:
-Thermistor temperature value table for Marlin
-Small Size: 1.25mmx2.0mm glass bead
-High accuracy: 1%
-Resistance value at 25°C=100K
-Wiring insulation: high temperature teflon/PTFE
-Wiring length: 1 meter Specification:
-Type: Bowden V6 J-head
-Thermister: 100K NTC
-1 x Metal J-Head hotend 1.75mm / 0.4mm nozzle / 12V 40W Heater / NTC3950 Thermistor
-1 x Heatsink Shroud with High Speed Fan 3010 12V 0.13A
-1 x One Meter long Bowden tubing 4mm OD 2mm ID
-1 x PC4-M6 Straight Fitting
- Metal J-head Hotend 1.75mm Filament 0.4mm Bowden Extruder Reprap 3D Printer.Included: NTC3950 thermistors and 12V 40W heater
- This Hotend with High Temperature Performance, you can reach over 280C
- Hotend can be used for both: direct feed and bowden applications. Good for ABS, PLA and other conventional print materials
- This hotend is equipped with stainless metal heatbreak and with PTFE liner inside heatbreak to reduce extruder jamming
- 1 x Metal J-Head hotend 1.75mm / 0.4mm nozzle / 12V 40W Heater / NTC3950 Thermistor. 1 x Heatsink Shroud with High Speed Fan 3010 12V 0.13A 1 x One Meter long Bowden tubing 4mm OD 2mm ID. 1 x PC4-M6 Straight Fitting