Gizmo Dorks 1.75mm ABS Filament 1kg / 2.2lb for 3D Printers, Transparent

Gizmo Dorks
We provide the highest quality 3D printing materials such as ABS, PLA, HIPS, PVA, and more. Our filaments are run with tight tolerances. There are no air bubbles or oily residues. Every filament comes loaded on a durable, hard plastic spool, not a cheap, flimsy cardboard spool.

ABS, Acrylonitrile Butadiene Styrene, is a favorite filament among 3D printer users because it is light weight and durable. It can be injection molded which makes it perfect for 3D printing extruders. It has a high glass transition temperature to reduce deformation, but it is also low enough to be safely attainable with standard 3D printers. ABS is a hard strong plastic with some flexibility when compared to PLA. It is also soluble in Acetone, and it can be easily sanded and machined.

Compatible with RepRap, Makerbot, UP!, Lulzbot, Afinia, Solidoodle, MakerGear, Printrbot LC, and more!

FAQ?
Is the spindle hole large enough to fit my Makerbot printer?
Yes! Our spindle holes are large enough to fit the Makerbot printers. You don’t have to worry about fabricating a spindle extension any longer. *NOTE, these spools will not fit inside of the new Makerbot 5th generation printer drawers. You can still use these spools and feed the filament directly through the top of the printer.

What other colors are available?
ABS comes in a variety of different vibrant colors, 30 different options total.
*New fluorescent colors are available. They glow under UV light, commonly known as black light.
*New color changing filaments are available; the filaments will change colors at 31°C (88°F). The filament is one color below 31°C, and when it is heated above 31°C, the filament will change to another color.
*New conductive ABS filament available. The conductive black ABS filament is exactly what the name implies. The conductive filament can be used for anti-static, static dissipative, and conduction of electric current.

Product Features

  • 1.75mm diameter, 1kg net weight, ABS Filament
  • Filament Roundness: +/- 0.07mm
  • Filament Diameter: +/- 0.05mm
  • Recommended Print Temperature: 230 – 240°C, depending on printer model
  • Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer

Check Out Our Website For Details…

Published by

admin

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

2 thoughts on “Gizmo Dorks 1.75mm ABS Filament 1kg / 2.2lb for 3D Printers, Transparent”

  1. It took some effort to get the tempature correct It did take some effort to get the temperature correct, but I am printing consistently well with the extruder at 240°C and the bed at 111°C for the first layer, and 230°/68° for subsequent layers. My printer is a DaVinci 1.0 with several upgrades including an E3D hotend. I am printing on glass with a thin wash of ABS slurry and a one layer raft. I have printed some good sized objects such as thingiverse.com/thing:75952 with exceptional clarity.The filament does print as a frosted…

  2. I really wanted to like it – Not worth the endless hassle I really wanted to like this filament because clear is such an awesome concept for 3D printing. I’ve gone through almost the entire roll after quite a few months. On occasion it will successfully complete small prints on my Makerbot 2x. However these successes are rare. Additionally it’s more of a translucent like frosted glass than clear after being printed.To go into more detail, I had the best luck printing at 240 and 245 C. Even then it would jam more often than not. There was…

Leave a Reply

Your email address will not be published. Required fields are marked *