Signstek 3PCS 3D Printing Build Surface, Printer Platform Sheet Heated Bed Tempered, 300mm x 300mm x 0.5mm, ABS/PLA Compatible

Product Features:
1. Print without bending.
2. Peel off from the platform easily.
3. Peel off from the platform cleanly.

Product specification:
Size: 300mm x 300mm x 0.5mm
Corresponding Resin: ABS / PLA

Package:
3 x 3D Printer Platform Sheet

Product Features

  • It sticks to the 3D printer platforms and improves the molding accuracy of the filament.rinter platforms and improves the molding accuracy of the filament.
  • Build sheet adheres to a print bed to help the filament stick during printing and print without warping.
  • After printing, peel off the model easily, and the sheet itself also devises the adhesive material, so you can peel it cleanly from the platform.
  • It could print for several times even in the same place. Since the sheet can be peeled cleanly from the platform, easy to maintenance and clean up.
  • Size: 300mm x 300mm x 0.5mm (11.81 x 11.81 x 0.0019 inch); Compatible Resin: ABS / PLA

Check Out Our Website For Details…

3D Printing Filament PLA 3mm 1KG spool (black), Dimentional Accuracy +/- 0.03mm

ArrayBay 3D printing filament means quality that is perfect for a variety of 3D printing project. This filament uses PLA (Polylactic Acid), 1kg spool with a 3.0mm diameter with an accuracy of +/-0.03mm. The processing temperature of this PLA is 190° – 230° C.

Quality is important for 3D printing, our filaments have very low water absorption, no air bubbles occur when printing. PLA is one of the most common materials used for 3D printing because of it’s accuracy, strength and has minimal warping or shrinking of your prints. It is a material that is a great choice for printing that requires flat areas or more accurate angles.

Product Features

  • 3mm Filament Diameter PLA material
  • Recommended processing temperature: 190° – 230° C
  • Filament roundness: +/-0.03mm

Check Out Our Website For Details…

Pxmalion ABS 3D Filament, Silver, 1.75mm, Accuracy +/- 0.03mm, Net Weight 1KG(2.2LB), Compatible with most 3D Printer & 3D Printing Pen

Pxmalion ABS 3D filaments are available in 10 colors: black/ blue/ green/ purple/ red/ sivler/ white/ yellow/ lucency/ organge.

ABS is less brittle and more ductile. It is best used for making durable parts that need to twist and higher temperatures. It can also be post-processed with acetone to provide a glossy finish. When 3D printing with ABS filament, a heated printing surface is recommended, as ABS plastic will contract when cooled leading to warped parts.

Specifics and Printing Conditions

– Material: ABS
– Color: Silver
– Diameter (Tolerance): 1.75 mm
– Net Weight: 1kg
– Compatible: Universal
– Printing Temperature: 230°C-260°C
– Recommended Printing Temp: 230°C-245°C
– Recommended Printing Speed: 40-90 mm/s
– Heated Bed: 80°C-100°C

Note: Pxmalion ABS filaments have been vacuumed sealed with desiccant to ensure the best printing performance.
 

Product Features

  • High durability, good strength and impact resistance;
  • Easy to process after printing;
  • Shrinkage during cooling, enclosed chamber recommended to control cooling speed;
  • Heated bed at 80°C – 100°C highly recommended;
  • • Ideal for moving parts, automotive parts, electronic housing and toys.

Check Out Our Website For Details…

CCTREE PLA 3D Printing Filaments2.85mm Material Accuracy +/- 0.05mm 1kg Spool (2.2lbs), Blue

Welcome to CCTREE 3D Products Our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality. The filaments are universally designed and compatible with 3D Printers using 2.85mm diameter filament, with a dimensional accuracy of +/- 0.05mm. 

PLA(Polylactic acid) is a environmentally friendly materials that can easy to be degradated and without smell. It is thermoplastic aliphatic polyester made of renewable resources like corn or starch. Its extrusion-temperature is much lower than ABS, and most often doesn’t require a heated bed. It is the ” default ” recommended material for many desktop 3D printers. It has the following characteristics:

• Good toughness high strength, high stiffness
• No block nozzle, good stick hot bed, a smooth PLA used
• Low shrinkage, thermoforming dimensional stability
•Accurate diameter: 2.85mm, variations + /-0.05mm, roundness +/-0.03mm

Product Features

  • 2.85mm diameter, 1kg net weight, PLA Filament
  • Spool Size:diameter 200mm + inner hub 55mm
  • PLA (Polylactic Acid) 3D Printing Filament Vacuumed Sealed With Desiccant
  • Print Temperature: 190 – 220°C, depending on printer model
  • Compatible with Makerbot,UP,Afinia,Leapfrog Creatr, Builder,Reprap,Felix, Ultimaker and any other FDM 3D printers

Check Out Our Website For Details…