3D Printer Filament Maker

ExtrusionBot The Personal Filament Maker

No matter what kind of 3D printer you own, you will need filament…
The Extrusionbot will:
SAVE YOU MONEY!!!
A spool of filament can cost $40/kg or more. The Extrusionbot can make the same spool for a few dollars in pellets!
SAVE YOU TIME!!!
Never run out of filament again. With the Extrusionbot you can produce as much fillament in any diameter you want.

Visit Our On-line Store Today!

Product Features

  • Make your own filament for pennies..
  • Worlds fastest filament extruder. Make color filament.
  • Works with all 3d printers
  • Makes ABS and PLA in 1.75 and 3mm.
  • The ExtrusionBot filament making machine, is the world’s fastest home built automatic filament extruder available on the market today. Capable of producing +/- three feet of colored filament per minute, providing top quality filament for all of your project needs. Our company offers fast service and speed, as well as superior customer service, ensuring fast delivery for every project. We are proud be able to ship your ExtrusionBot personal filament maker to you anywhere in the world. Get your ExtrusionBot today! Visit our Store for pellets, accessories and add-on components. Start making 3-D printing faster and more affordable!

Visit The Website For More Information…

What's Hot Today!

3D Printer Rod Parts Kit – 6 Rods, 12 Set Screws, 12 Rod Ends

Parts needed to assemble rods for a 3D printer

Product Features

  • (6) Strong Wall Tube Rod, 0.230 Inch Outer Diameter, 0.144 Inch Inner Diameter, 0.043 Inch Wall, At least 12 inches long
  • (12) Set Screws, m4 20mm
  • (12) Traxxas Rod Ends, 7/8″ Large Rod Ends with Hollow Pivot Balls

Visit The Website For More Information…

What's Hot Today!

SainSmart LCD Smart controller 12864 Version Ramps 1.4 With LED control for 3D Printer,RepRap,Mendel and Arduino UNO R3 Mega

Added a small function which is LED backgroud light control circuit to smart
controller , with shorting the pins to decide the LED turn on all the time or
turn on 30 seconds and than turn off automaticly.IF you used to start the
printing jobs at night and get the parts at the next morning , that means with
the new modification LCD back light will not annoying you any more ,you can make
the time of light turn on longer or shorter by adjust the TRIMM R4 100K form 10s
to 2mins. Hope you will like that . This controller is 100% compaitble with
original design .That mean you can use the original RAMPS adpter.

Package Content

1 x 3D ramps 12864LCD controller

1 x Connector

2 x 20 cm cable

Product Features

  • SainSmart RAMPS1.4 LCD12864 intelligent controller
  • LED background light control circuit
  • This controller is 100% compaitble with original design.
  • LED background light control circuit, a small function of intelligent controller, With pin short time to decide on all LED turn or steering 30 seconds
  • You can turn on the light time to do long or short form of the adjustment TRIMM R4100K from 10 seconds to 2 minutes If you use a print job at night and parts department, which means that the new modifications LCD backlight would be suitable for you

Visit The Website For More Information…

What's Hot Today!

SainSmart Ramps 1.4 + A4988 + Mega2560 R3 + Endstop + MK2B + Cooler Fan Kit for RepRap 3D Printer Arduino Mega2560 UNO R3

This SainSmart 3D Printer Kit with hundreds of Arduino projects is invented
by SainSmart for Arduino lovers. This Kit is recommended for the beginners who
are interested in leaning the basics of Arduino programming as well as the
experts in Programming. Components are included in the kit to get you started
making your own Arduino Projects.

What’s more, a PDF Tutorial Instruction Manual will be provided for you to
download, which can definitely give you a full into to Arduino programming as
well how to use each component included in this
kit. Once you’ve gone through the instruction guide and mastered the basics of
each component go ahead and make your own project combing one or many
components. With this kit you will learn what Arduino is all about and how it is
used.

Package Content

1 x RAMPS 1.4

1 x Mega 2560 R3

5 x A4988 driver

1 x LCD 2004 With Controller

1 x SD card breakout For ramps

1 x Cooler Fan for 3D ramps

6 x Mechanical Endstop with cable

1 x RAMPS 1.4 wiring cable

1 x Heatbed MK2B

1 x USB Cable

Note:Please download the codes & instructions via
the below link:

https://s3-ap-northeast-1.amazonaws.com/sain-amzn/20/20-011-962/3D.rar

https://s3-ap-northeast-1.amazonaws.com/sain-amzn/20/ramps.rar

https://s3-ap-northeast-1.amazonaws.com/sain-amzn/20/3d+lcd+software/arduino-1.0.1.rar

Product Features

  • Sainsmart A4988 driver is a carrier board or breakout board for Allegro’s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection by Pololu; we therefore recommend careful reading of the A4988 datasheet before using this product. This stepper motor driver lets you control one bipolar stepper motor at up to 2 A output current per coil.
  • MK2B is the latest and the best type of heatbed money can buy as of today. 100% compatible with all Prusa and Mendel 3d printer variants. Etching: 35um copper. Laminate: FR4 1.6mm
  • Sainsmart RAMPS 1.4 is a Mega Pololu Shield, or RAMPS for short,designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino Mega with the powerful Arduino MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino MEGA shield for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack. This board is mostly based on Adrian’s Pololu_Electronics and work by Tonok. Copper etch resists methods suggested by Vik. Also inspired by Vik’s work with EasyDrivers. circuit design based mostly on Adrian’s Pololu_Electronics Joaz at RepRapSource.com supplied initial pin definitions and many design improvements. Much inspiration, suggestions, and ideas from Prusajr, Kliment, Maxbots, Rick, and many others in the RepRap community.
  • Sainsmart Mega2560 R3 is an ATmega2560 as core microcontroller development board itself has 54 groups digital I / O input / output terminal (14 groups do PWM outputs), 16 sets of simulation than the input side, group 4 UARTs (hardware serial ports), using the 16 MHz crystal oscillator. With the bootloader, download the program directly via USB without having to go through other external writer. Supply part of the optional USB power, or as an external power using the AC-to-DC adapter and battery. Arduino development IDE interface is based on open-source principles, allows you to free download for use in project work, school teaching, motor control, interactive works.
  • Sainsmart LCD 2004 with Controller This Smart Controller contains a SD-Card reader, an rotary encoder and a 20 Character x 4 Line LCD display. You can easy connect it to your Ramps board using the “smart adapter” included. After connecting this panel to your Ramps you don’t need your pc any more, the Smart Controller supplies power for your SD card. Further more all actions like calibration, axes movements can be done by just using the rotary encoder on the Smart Controller. Print your 3D designs without PC, just with a g-code design stored on the SD card.

Visit The Website For More Information…

What's Hot Today!